Pickering Series 101
CMOS Drive High Voltage SIL Reed Relays
SoftCenter ® construction
Highest quality instrumentation grade switches
Board space may be saved by eliminating the need for drivers
Direct drive from 74HC logic
Encapsulated in a plastic package with internal mu-metal magnetic screen
Wide range of switch confi gurations - 1 Form A, 1 Form B, 2 Form A, 1 Form C
Two pole relay requires the same board area as the single pole type
Dry and mercury wetted switches are available with the same pin configuration and footprint
5, 12 and 24 Volt coils are standard, with or without internal diode
Insulation resistance greater than 10E12 Ohms (1TOhms) for dry Form A devices

100% tested for dynamic contact resistance

The Series 101 have very high coil resistances. 5 Volt dry versions may be driven directly from 74HC or 74HCT logic without the need for additional drivers.

74HC logic will drive up to 4mA at 5 Volts, therefore a coil resistance of 1600 ohms is desirable to avoid running the IC at its maximum rating.



  Download PDF Data Sheet for Series 101
  Download 3D Models for Series 101





HCT Logic Pickering Reed Relays 101

HCT Pickering Reed Relay Dimensions 101