United Kingdom
Pickering Relay
United Kingdom

Pickering Series 120

120-1-a

ULTRA-HIGH DENSITY 4MM REED RELAYS

Single Pole Reed Relays
Up to 1 Amp switching - Very high packing density
Stacking on 4mm x 4mm pitch

  • 3V, 5V or 12V coils
  • 1 Form A (SPST) Normally Open Energize to make relay
  • Plastic package with internal mu-metal magnetic screen
  • Insulation resistance greater than 10¹²Ω
  • 100% tested for dynamic contact resistance for guaranteed performance
  • Highest quality instrumentation grade reed switches
  • Many benefits compared to industry standard relays. Learn more here >.
  • Highest packing density currently available
  • Designed in the United Kingdom and manufactured in the United Kingdom and the Czech Republic.

Download Data Sheet PDF

The Series 120 reed relay range takes up the minimum board area making them ideal for very high density applications such as A.T.E. switching matrices or multiplexers. Requiring a board area of only 4mm x 4mm, these relays allow the highest packing density currently available.

Two switch types are available, a general purpose sputtered ruthenium switch rated at 15 Watts, 1 Amp (3 volt version) or 20 Watts, 1 Amp (5 & 12 volt versions) and a low level sputtered ruthenium switch rated at 10 Watts, 0.5 Amps.

These are the same reed switches as used in many other long established Pickering ranges but are orientated vertically within the package, allowing this high density. The small size of the package does not allow an internal diode. Back EMF suppression diodes are included in many relay drivers but if they are not, and depending on your drive methods, these may have to be provided externally.

While socketing relays is not normally recommended due to the risk of affecting contact resistance integrity, it is appreciated that sockets may sometimes be desired for ease of servicing/replacement, in the case of a relay being damaged or reaching the end of its working life.

The device has pins on a 2mm square pitch. There are suitable connectors available from some manufacturers, both SMD and Through Hole, that will allow these relays to be stacked in either a row or in a matrix on a 4mm pitch.

Download Data Sheet PDF 

Series 120

Download the Series 120 Datasheet

All our data sheets have been recently updated to include additional environmental specifications, mechanical characteristics and relay weights, RF plots for coaxial relays (showing VSWR, isolation and insertion loss), interactive links to further useful information, comparison tables to similar relay ranges and much more.

Download the Series 120 3D Models

The download is a zip file containing 3D models in STEP, IGS and SLDPRT formats (free viewers are available for these formats).

  • Free Sample Service - determining which components to design in can be challenging. Fortunately, here at Pickering Electronics, we provide free working samples to help you evaluate our high-quality Reed Relays.
  • Reed Relay Selector Tool - this tool will help you narrow down our large offering to get you the correct reed relay for your application. Once you narrow your selections down you can download a relay datasheet for more information, purchase in stock items or request a quote to find out lead times of made to order (MTO) relays.
  • Concise Tech Guide - this guide will help you to maximise the reliability of your design.
  • Quality Assurance - learn more about the various accreditations and certifications that Pickering holds.
  • Custom Designed Reed Relays - With over a thousand catalog parts there is plenty of choice when choosing the right Reed Relay for your product, but if you cannot find one suitable for your needs Pickering can customize our standard reed relay parts to suit your specific requirements and applications.

All Pickering reed relays feature the highest quality instrumentation grade reed switches making them suitable for the most demanding applications. Internal mu-metal magnetic screens (optional on Series 103) allow very high packing density. Diodes are optional.

The below table will help you narrow down our offering to get you the correct reed relay for your application.

Apply
Reset
PEL Contact Configuration
Coil Voltage
Switching Current
(Amps)
Switching Power
(Watts)
PEL Diode
Switching Voltage
to GO
Stand-off Voltage
(DC/AC peak)
to GO
Width (mm)
to GO
Depth (mm)
to GO
Height (mm)
to GO
Category
Apply
Reset
If you experience any technical difficulties whilst loading this page, please clear your browser cache and reload. Still having trouble? Contact us here
If you experience any technical difficulties whilst loading this page, please clear your browser cache and reload. Still having trouble? Contact us here
Scroll right to view full data information
Showing 1 – 6 of 6 results Showing all 6 results Showing the single result No results found
10 per page
Filters Sort results
Reset Apply
Part Number
Contact Configuration
Switching Current (Amps)
Switching Power (Watts)
Switching Voltage (DC or AC peak)
Stand-off Voltage (DC or AC peak)
Coil Voltage
Coil Resistance (Ω)
Switch Type
Diode
Depth (mm)
Width (mm)
Height (mm)
View Datasheet
Stock
Price
Add to Bag
1 Form A - SPST N.O.
1
Amps
15
200
240
3V
200 Ω
General Dry Reed
No
3.9
3.9
15.5
56
$10.23
Max: 56
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
1
Amps
20
200
240
5V
300 Ω
General Dry Reed
No
3.9
3.9
15.5
144
$10.26
Max: 144
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
1
Amps
20
200
240
12V
800 Ω
General Dry Reed
No
3.9
3.9
15.5
58
$10.39
Max: 58
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
0.5
Amps
10
200
240
3V
200 Ω
Low Level Dry Reed
No
3.9
3.9
15.5
24
$10.14
Max: 24
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
0.5
Amps
10
200
240
5V
500 Ω
Low Level Dry Reed
No
3.9
3.9
15.5
0 - MTO
$10.15
1 Form A - SPST N.O.
0.5
Amps
10
200
240
12V
800 Ω
Low Level Dry Reed
No
3.9
3.9
15.5
6
$10.31
Max: 6
Min: 1
Step: 1
Add
Scroll to Top