United Kingdom
Pickering Relay
United Kingdom

SINGLE-IN-LINE (SIL/SIP) SERIES 111 - 131

All Pickering reed relays feature the highest quality instrumentation grade reed switches making them suitable for the most demanding applications. Internal mu-metal magnetic screens (optional on Series 103) allow very high packing density. Diodes are optional.

PEL Series 111

Series 111

The Pickering Series 111 is a range of magnetically screened single-in-line reed relays that stack on 0.15 inches by 0.4 inches pitch. They have an identical footprint to the Series 110 and 112 but the height is reduced to only 0.26 inches.

These relays require around one third the board area of the more usual 0.2 x 0.8 inch devices and are ideal for high density applications.

Learn More

Request Free
Evaluation Samples

More Info

Series 112

The Pickering Series 112 is a range of magnetically screened single-in-line reed relays that require a board area of only 0.15 inches (3.8mm.) by 0.4 inches (10mm.) while retaining the 10 Watts, 0.5 Amps rating associated with larger relays.

Learn More

Request Free
Evaluation Samples

More Info

Pickering Relay 113

Series 113

The Pickering Series 113 is a range of magnetically screened single-in-line reed relays that require a board area of only 0.15 inches (3.8mm.) by 0.5 inches (12.7mm.)

 

The Form A (energize to make) versions retain the 10 Watts, 0.5 Amps rating associated with larger relays. The changeover version has a 2 Watts rating.

Learn More

Request Free
Evaluation Samples

More Info

Series 114

Series 114

The Series 114 is a range of Single-In-Line reed relays intended for power levels that are beyond the capabilities of conventional dry SIL reed relays.

The more usual dry relays are rated at 0.5 amps at 10 Watts. The Series 114 have a rating of 1 amp switching at up to 40 watts and will carry 2 amps. In many cases, this higher rating will allow them to be used as an alternative to mercury wetted reed relays.

Learn More

Request Free
Evaluation Samples

More Info

Series 115

The Pickering Series 115 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.

They are pin compatible with the Pickering Series 116 and 117 but have a slightly higher profile.

The reed switch/coil assemblies used in this series are the same as used in the long established and well proven, Series 109 and 109P.

The range features an internal mu-metal screen to eliminate problems that would otherwise be experienced due to magnetic interaction when they are closely stacked.

Learn More

Request Free
Evaluation Samples

More Info

Series 116

The Pickering Series 116 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.

They have a switch rating of 10 Watts, 0.5 Amps and are pin compatible with the Pickering Series 117 have a switch rating of 10W, 0.5 Amps with 1 Form A (SPST) or 2 Form A (DPST) N.O. versions available and 3, 5 or 12 V coils.

Switches have sputtered ruthenium contacts making them ideal for low level or “cold” switching applications.

Learn More

Request Free
Evaluation Samples

More Info

Series 117

Series 117

The Pickering Series 117 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.

They are available with either 1 or 2 Form A (energize to make) switches. These are the ideal choice for very high density applications.

Learn More

Request Free
Evaluation Samples

More Info

Series 118

Series 118

The Pickering Series 118 is a range of very sensitive reed relays that are ideal for portable electronic instruments or other applications where low power consumption and a very small footprint is important. 

They have 5 volt coils with a resistance up to 2200 Ohms and the option of an internal diode.

Two switch types are available. Switch type number 1 is better suited for general purpose applications, while Switch type number 2 is better suited to low level or ‘cold’ switching.

Learn More

Request Free
Evaluation Samples

More Info

Series 119

Series 119

The Pickering Series 119 is a new range of very small Single-in-Line Reed Relays intended for voltages very much higher than standard small SIL relays.

The vacuumed, sputtered ruthenium reed switches have a superb low level performance also, which makes them an ideal choice where a wide range of signals are involved.

Learn More

Request Free
Evaluation Samples

More Info

Series 131

Series 131

The Pickering Series 131 is a new range of very small Single-In-Line reed relays intended for voltages very much higher than standard small SIL relays.


The vacuumed, sputtered ruthenium reed switches have a superb low level performance also, which makes them an ideal choice where a wide range of signals are involved.

Learn More

Request Free
Evaluation Samples

More Info

Series 102

Series 100-110

View more Single-In-Line (SIL/SIP) Reed relays.

Shop Reed Relays for SIL/SIP 111-131

The below table will help you narrow down our offering to get you the correct reed relay for your application.

Once you narrow your selections down you can download a reed relay data sheet for more information or request a quote to find out prices and lead times.

PEL Series
9
PEL Contact Configuration
Coil Voltage
Switching Current
(Amps)
Switching Power
(Watts)
PEL Diode
Switching Voltage
(DC/AC peak)
to GO
Stand-off Voltage
(DC/AC peak)
to GO
Width (mm)
to GO
Depth (mm)
to GO
Height (mm)
to GO
Category
If you experience any technical difficulties whilst loading this page, please clear your browser cache and reload. Still having trouble? Contact us here
If you experience any technical difficulties whilst loading this page, please clear your browser cache and reload. Still having trouble? Contact us here
Scroll right to view full data information
Showing 1 – 7 of 155 results Showing all 155 results Showing the single result No results found
7 per page
Clear filters
PEL Series:
PEL Series : Series 113
PEL Series : Series 114
PEL Series : Series 115
PEL Series : Series 116
PEL Series : Series 117
PEL Series : Series 118
PEL Series : Series 119
PEL Series : Series 131
Clear filters
Filters Sort results
Reset Apply
Part Number
Pickering Compare
Contact Configuration
Switching Current (Amps)
Switching Power (Watts)
Switching Voltage (DC or AC peak)
Stand-off Voltage (DC or AC peak)
Coil Voltage
Coil Resistance (Ω)
Switch Type
Diode
Depth (mm)
Width (mm)
Height (mm)
View Datasheet
Stock
Price
Add to Bag
1 Form A - SPST N.O.
0.7
Amps
10
1000
1500
5V
250 Ω
1.5KV Standoff
Yes
3.7
12.5
6.6
0 - MTO
$15.56
1 Form A - SPST N.O.
0.7
Amps
10
1000
1000
5V
250 Ω
1KV Standoff
No
3.7
12.5
6.6
0 - MTO
$15.28
1 Form A - SPST N.O.
0.7
Amps
10
1000
1500
5V
250 Ω
1.5KV Standoff
No
3.7
12.5
6.6
0 - MTO
$15.10
1 Form A - SPST N.O.
0.7
Amps
10
1000
1000
5V
250 Ω
1KV Standoff
No
3.7
12.5
6.6
0 - MTO
$16.06
1 Form A - SPST N.O.
0.7
Amps
10
1000
1500
12V
750 Ω
1.5KV Standoff
Yes
3.7
12.5
6.6
6
$15.31
Max: 6
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
0.7
Amps
10
1000
1000
12V
250 Ω
1KV Standoff
Yes
3.7
12.5
6.6
41
$17.07
Max: 41
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
0.7
Amps
10
1000
1500
12V
750 Ω
1.5KV Standoff
No
3.7
12.5
6.6
6
$14.88
Max: 6
Min: 1
Step: 1
Add
1223
Scroll to Top