SINGLE-IN-LINE (SIL/SIP) SERIES 111 - 131
All Pickering reed relays feature the highest quality instrumentation grade reed switches making them suitable for the most demanding applications. Internal mu-metal magnetic screens (optional on Series 103) allow very high packing density. Diodes are optional.
Series 111
The Pickering Series 111 is a range of magnetically screened single-in-line reed relays that stack on 0.15 inches by 0.4 inches pitch. They have an identical footprint to the Series 110 and 112 but the height is reduced to only 0.26 inches.
These relays require around one third the board area of the more usual 0.2 x 0.8 inch devices and are ideal for high density applications.
Series 112
The Pickering Series 112 is a range of magnetically screened single-in-line reed relays that require a board area of only 0.15 inches (3.8mm.) by 0.4 inches (10mm.) switching up to 20 Watts, 1 Amps rating associated with larger relays.
Series 113
The Pickering Series 113 is a range of magnetically screened single-in-line reed relays that require a board area of only 0.15 inches (3.8mm.) by 0.5 inches (12.7mm.)
The Form A (energize to make) versions retain the 20 Watts, 1 Amps rating associated with larger relays. The changeover version has a 2 Watts rating.
Series 114
The Series 114 is a range of Single-In-Line reed relays intended for power levels that are beyond the capabilities of conventional dry SIL reed relays.
The more usual dry relays are rated at 0.5 amps at 10 Watts. The Series 114 have a rating of 1 amp switching at up to 40 watts and will carry 2 amps. In many cases, this higher rating will allow them to be used as an alternative to mercury wetted reed relays.
Series 115
The Pickering Series 115 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.
They are pin compatible with the Pickering Series 116 and 117 but have a slightly higher profile.
The reed switch/coil assemblies used in this series are the same as used in the long established and well proven, Series 109 and 109P.
The range features an internal mu-metal screen to eliminate problems that would otherwise be experienced due to magnetic interaction when they are closely stacked.
Series 116
The Pickering Series 116 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.
They have a switch rating of up to 20 Watts, 1 Amps and are pin compatible with the Pickering Series 117 have a switch rating of 10W, 0.5 Amps with 1 Form A (SPST) or 2 Form A (DPST) N.O. versions available and 3, 5 or 12 V coils.
Switches have sputtered ruthenium contacts making them ideal for low level or “cold” switching applications.
Series 117
The Pickering Series 117 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.
They are available with either 1 or 2 Form A (energize to make) switches. These are the ideal choice for very high density applications.
Series 118
The Pickering Series 118 is a range of very sensitive reed relays that are ideal for portable electronic instruments or other applications where low power consumption and a very small footprint is important.
They have 5 volt coils with a resistance up to 2200 Ohms and the option of an internal diode.
Two switch types are available. Switch type number 1 is better suited for general purpose applications, while Switch type number 2 is better suited to low level or ‘cold’ switching.
Series 119
The Pickering Series 119 is a new range of very small Single-in-Line Reed Relays intended for voltages very much higher than standard small SIL relays.
The vacuumed, sputtered ruthenium reed switches have a superb low level performance also, which makes them an ideal choice where a wide range of signals are involved.
Series 131
The Pickering Series 131 is a new range of very small Single-In-Line reed relays intended for voltages very much higher than standard small SIL relays.
The vacuumed, sputtered ruthenium reed switches have a superb low level performance also, which makes them an ideal choice where a wide range of signals are involved.
Series 100-110
View more Single-In-Line (SIL/SIP) Reed relays.
Shop Reed Relays for SIL/SIP 111-131
The below table will help you narrow down our offering to get you the correct reed relay for your application.
Once you narrow your selections down you can download a reed relay data sheet for more information or request a quote to find out prices and lead times.
Part Number | Contact Configuration | Switching Current (Amps) | Switching Power (Watts) | Switching Voltage (DC or AC peak) | Stand-off Voltage (DC or AC peak) | Coil Voltage | Coil Resistance (Ω) | Switch Type | Diode | Depth (mm) | Width (mm) | Height (mm) | View Datasheet | Stock | Price | Add to Bag | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1500 | 12V | 750 Ω | 1.5KV Standoff | No | 3.7 | 12.5 | 6.6 | 6 | $14.88 | Max: 6 Min: 1 Step: 1 Add | |||
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1000 | 12V | 750 Ω | 1KV Standoff | Yes | 3.7 | 12.5 | 6.6 | 0 - MTO | $16.24 | ||||
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1500 | 12V | 750 Ω | 1.5KV Standoff | No | 3.7 | 12.5 | 6.6 | 0 - MTO | $15.62 | ||||
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1000 | 12V | 750 Ω | 1KV Standoff | No | 3.7 | 12.5 | 6.6 | 0 - MTO | $15.78 | ||||
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1500 | 3V | 100 Ω | 1.5KV Standoff | Yes | 3.7 | 12.5 | 6.6 | 0 - MTO | $14.69 | ||||
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1000 | 3V | 100 Ω | 1KV Standoff | Yes | 3.7 | 12.5 | 6.6 | 0 - MTO | $16.43 | ||||
1 Form A - SPST N.O. | 0.7 Amps | 10 | 1000 | 1000 | 12V | 750 Ω | 1KV Standoff | No | 3.7 | 12.5 | 6.6 | 0 - MTO | $16.57 |