FORGOT YOUR DETAILS?

Up to 20W SPST (N.O.) Reed Relay

All Pickering reed relays feature the highest quality instrumentation grade reed switches making them suitable for the most demanding applications. Internal mu-metal magnetic screens (optional on Series 103) allow very high packing density. Diodes are optional.

Pickering Series 110

V-SIL Reed Relays
For stacking on 0.15 x 0.4 inches pitch giving SUPERB PACKING DENSITY

SoftCenter™  construction
• Highest quality instrumentation grade switches
• Plastic package with internal mu-metal magnetic screen
• They take up the minimum of board area, conserving
board space
• Many benefits compared to industry standard relays. Learn more here >.
• Insulation resistance greater than 10E12 Ohms (1TOhms)
• 5 and 12 Volt coils are standard, with or without internal diode
• 5 Volt coils of 500 ohms may be driven directly from TTL logice
• 100% tested for dynamic contact resistance

The Pickering Series 110 V-SIL (vertical single-in-line) is a range of magnetically screened single-in-line reed relays that stack on 0.15 inches by 0.4 inches pitch.The switches in this range are mounted vertically within the package, this allows the use of the same switch types as would normally be found in relays requiring a very much larger board area.

In this way, a 10 Watt switch power rating is achieved. Two types of SPST (N.O.) / Form A (energize to make) switches are available, a general purpose version and type suitable for low level or “cold” switching applications.

These relays require around one third the board area of the more usual 0.2 x 0.8 inch devices. These are your ideal choice for high density applications such as A.T.E. switching matrices or where very little board area is available. If a lower profile device is required, look at the Series 111 & 112.

The Series 110 is encapsulated in a plastic package using a very high resistivity resin. The relay has an internal mu-metal screen which totally eliminates the risk of magnetic interaction problems. An unscreened device mounted on this pitch would have an interaction figure of around 40 percent. Relays of this size without magnetic screening would therefore be totally unsuitable for applications where dense packing is required. Pickering Series 110 have atypical interaction figure of 5 percent.

3, 5 and 12 Volt coils are standard, with the option of an internal diode. 5 Volt coils have a resistance of 500 ohms and may be driven directly from TTL logic.

 

TOP
X