Dry Form C Reed Relays. New 109 Changeover Version • Dry Form C Reed Relays • Choice of mu-metal package or plastic package with internal mu-metal magnetic screen. Pickering Electronics are pleased to announce the addition of a dry Form C (changeover) reed relay to their established Series 109. This increases the scope of the
Reed Relays with 3 volt operating coils Pickering Electronics are pleased to announce the release of 3 Volt relays 3 Volt Reed Relays • 3 volt operating coils now available in most ranges • Ideal for equipment using 3 volt logic • 1 Form A versions now available Versions with 3 volt operating coils are
Low power consumption – 5 volt coils with a resistance of 2200 Ohms Pickering Electronics are pleased to announce the release of the Series 118. Series 118 SIL Reed Relays • Requires a board area of only 0.2 x 0.33 inches • Plastic package with internal mu-metal magnetic screen • Dry ruthenium switches The new
Smallest board area for 15 Watts Reed Relay Following the success of the Series 117 and 116, Pickering Electronics are pleased to announce the release of the Series 115. Series 115 SIL Reed Relays • 10 or 15 watts switching – Very high packing density • Internal mu-metal magnetic screen • Stacks on 0.15 X
Pickering Electronics began producing high-quality relays in 1968 and has continued with this ethos, producing the very best relays for instrumentation, without straying into the manufacture of lower quality commodity devices. This is reflected in the latest two-switch version of the Series 117. This superb DOUBLE POLE Single-in-Line (SIL) relay requires a minimum of board
Following the success of the Series 117 Introduced in 2002, Pickering Electronics have now released the SERIES 116. This new range is pin compatible with the Series 117 but features a switching power rating of 10 Watts rather than 3 Watts. The single pole version requires a board area of only 0.15 x 0.27 inches.
Range includes the smallest changeover reed relays available Pickering Electronics are pleased to announce a new range of Single-in-Line (SIL) reed relays. The Series 113 requires a board area of only 0.15 inches (3.8mm.) by 0.5 inches (12.7mm.). As well as the more usual Single pole energize to make type (1 Form A), the range