UP TO 1A, 20W SWITCHING REED RELAYS

PICKERING SERIES 115

115

Miniature size enables very high packing density on your PCB

Single-in-Line Reed Relays Up to 20 Watts switching – Very high packing density Stacks on 0.15 x 0.27 inches pitch

• SoftCenter construction
3V, 5V or 12V coils with optional internal diode
10, 15 or 20 Watts switching
1 Form A (SPST) or 2 Form A (DPST) N.O.
• Highest quality instrumentation grade switches
• Plastic package with internal mu-metal magnetic screen
• They take up the minimum of board area, saving cost and space
• Insulation resistance greater than 1E12 Ohms
100% tested for dynamic contact resistance for guaranteed performance
• Suitable for high density instrumentation applications such as A.T.E. switching multiplexers.

Download Data Sheet PDF 

The Pickering Series 115 is a range of Single-in-Line relays intended for very high density applications such as A.T.E. switching matrices or multiplexers.

They are pin compatible with the Pickering Series 116 and 117 but have a slightly higher profile.

The reed switch/coil assemblies used in this series are the same as used in the long established and well proven, Series 109 and 109P.

Two switch types are available. Both types have sputtered ruthenium contacts for long life and high reliability.

Switch type number 1 is better suited for general purpose applications. It has a layer of copper beneath the ruthenium to help dissipate the heat from the contact area. This gives an improved current inrush handling ability.

Switch type number 2 should be chosen for low level or ‘cold’ switching applications.

Single switch versions require a board area of only 0.15 inches x 0.27 inches. This is one quarter of the board area of the industry standard 0.2 x 0.8 inches Single-in-Line package. The very small size of these relays often makes it possible to increase the functionality of existing designs without increasing the size of printed circuit boards.

The relays feature an internal mu-metal magnetic screen. Mu-metal has the advantage of a high permeability and low magnetic remanence and eliminates problems that would otherwise occur due to magnetic interaction. Relays of this size without magnetic screening would be totally unsuitable for applications where dense packing is required.

3 volt, 5 volt or 12 volt coils are available. An internal Back E.M.F suppression diode is available as an option.

Download Data Sheet PDF 

Download the Series 115 Datasheet

All our data sheets have been recently updated to include additional environmental specifications, mechanical characteristics and relay weights, RF plots for coaxial relays (showing VSWR, isolation and insertion loss), interactive links to further useful information, comparison tables to similar relay ranges and much more.

Download the Series 115 3D Models

The download is a zip file containing 3D models in STEP, IGS and SLDPRT formats (free viewers are available for these formats).

  • Free Sample Service – determining which components to design in can be challenging. Fortunately, here at Pickering Electronics, we provide free working samples to help you evaluate our high-quality Reed Relays.
  • Reed Relay Selector Tool – this tool will help you narrow down our large offering to get you the correct reed relay for your application. Once you narrow your selections down you can download a relay datasheet for more information, purchase in stock items or request a quote to find out lead times of made to order (MTO) relays.
  • Concise Tech Guide – this guide will help you to maximise the reliability of your design.
  • Quality Assurance – learn more about the various accreditations and certifications that Pickering holds.
  • Custom Designed Reed Relays – With over a thousand catalog parts there is plenty of choice when choosing the right Reed Relay for your product, but if you cannot find one suitable for your needs Pickering can customize our standard reed relay parts to suit your specific requirements and applications.
All Pickering reed relays feature the highest quality instrumentation grade reed switches making them suitable for the most demanding applications. Internal mu-metal magnetic screens (optional on Series 103) allow very high packing density. Diodes are optional.

The below table will help you narrow down our offering to get you the correct reed relay for your application.

Apply
Reset
PEL Contact Configuration
Coil Voltage
Switching Current
(Amps)
Switching Power
(Watts)
PEL Diode
Switching Voltage
to GO
Stand-off Voltage
(DC/AC peak)
to GO
Width (mm)
to GO
Depth (mm)
to GO
Height (mm)
to GO
Category
Apply
Reset
If you experience any technical difficulties whilst loading this page, please clear your browser cache and reload. Still having trouble? Contact us here
If you experience any technical difficulties whilst loading this page, please clear your browser cache and reload. Still having trouble? Contact us here
Scroll right to view full data information
Showing 1 – 10 of 16 results Showing all 16 results Showing the single result No results found
10 per page
Filters Sort results
Reset Apply
Part Number
Contact Configuration
Switching Current (Amps)
Switching Power (Watts)
Switching Voltage (DC or AC peak)
Stand-off Voltage (DC or AC peak)
Coil Voltage
Coil Resistance (Ω)
Switch Type
Diode
Depth (mm)
Width (mm)
Height (mm)
View Datasheet
Stock
Price
Add to Bag
1 Form A - SPST N.O.
0.5
Amps
10
200
240
12V
1000 Ω
Low Level Dry Reed
Yes
3.81
6.86
15.5
0 - MTO
$7.92
1 Form A - SPST N.O.
1
Amps
15
200
240
3V
250 Ω
General Dry Reed
Yes
3.81
6.86
15.5
12
$7.87
Max: 12
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
0.5
Amps
10
200
240
12V
1000 Ω
Low Level Dry Reed
No
3.81
6.86
15.5
29
$7.50
Max: 29
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
1
Amps
15
200
240
3V
250 Ω
General Dry Reed
No
3.81
6.86
15.5
5
$7.44
Max: 5
Min: 1
Step: 1
Add
2 Form A - DPST N.O.
1
Amps
15
200
240
5V
500 Ω
General Purpose
Yes
3.81
10.16
15.5
423
$12.37
Max: 423
Min: 1
Step: 1
Add
1 Form A - SPST N.O.
1
Amps
20
200
240
5V
500 Ω
General Dry Reed
Yes
3.81
6.86
15.5
0 - MTO
$7.87
2 Form A - DPST N.O.
1
Amps
15
200
240
5V
250 Ω
Low Level Dry Reed
No
3.81
10.16
15.5
0 - MTO
$11.92
1 Form A - SPST N.O.
1
Amps
20
200
240
5V
500 Ω
General Dry Reed
No
3.81
6.86
15.5
0 - MTO
$7.44
2 Form A - DPST N.O.
0.5
Amps
10
200
240
5V
375 Ω
Low Level Dry Reed
Yes
3.81
10.16
15.5
0 - MTO
$12.15
1 Form A - SPST N.O.
1
Amps
20
200
240
12V
1000 Ω
General Dry Reed
Yes
3.81
6.86
15.5
5
$8.03
Max: 5
Min: 1
Step: 1
Add
12
Scroll to Top