20W (Dry) & 50W (Mercury) Reed Relays

All Pickering reed relays feature the highest quality instrumentation grade reed switches making them suitable for the most demanding applications. Internal mu-metal magnetic screens (optional on Series 103) allow very high packing density. Diodes are optional.

Pickering Series 105

SIL / SIP Reed Relays

SoftCenter ® construction
• Highest quality instrumentation grade reed switches
• Encapsulated in a plastic package with internal mu-metal magnetic screen
• Wide range of switch configurations -
Form A, 1 Form B, 2 Form A, 1 Form C
• Two pole relay requires the same board area as the single pole type
• Dry and mercury wetted reed switches are available with the same pin configuration and footprint.
• Insulation resistance greater than 10E12 Ohms (1TOhms) for dry reed Form A devices
• 5, 12 and 24 Volt coils are standard, with or without internal diode
• 100% tested for dynamic contact resistance

The Series 105 is a range of Single-in Line reed relays, available with a wide variety of switching configurations and switch types, including mercury wetted reed relay versions.

They feature internal mu-metal magnetic screens which allow high packing density without the risk of magnetic interaction problems.

The Pickering Series 100, 101, 103, 106, 107 and 108 all have the same pin locations as the Series 105. If a reduced coil power is desired, please consider our Series 100 and 101 which may be driven directly from CMOS logic.

If a higher packing density is required, smaller devices are available in other Pickering SIL / SIP reed relay ranges.