FORGOT YOUR DETAILS?

ULTRA HIGH DENSITY 4mm Reed Relays

Ultra-high density 4mm2 TM reed relay product lines stack on a 4mm x 4mm pitch, allowing the highest packing density currently available in the industry. The relays feature the highest quality instrumentation grade reed switches and internal mu-metal magnetic screens. 4mm2 TM  reed relays are ideal for very high density applications such as A.T.E. switching matrices or multiplexers.

Pickering Series 122 Reed Relays

10 Watts, 0.5 Amp Switching
Single Pole Single Throw Reed Relay
Taking up the smallest PCB area of only 4mm x 4mm

  • 3 or 5 Volt coils
  • Fast operate and release times, typically 150 μs or less, make the relays ideal for high speed test systems.
  • 1 Form A (SPST) Normally Open (NO) Energize to make.
  • Suitable for A.T.E. switching matrices or multiplexers.
  • Internal mu-metal magnetic screen allows ultra-high PCB packing density, saving significant cost and space.
  • 100% tested for dynamic contact resistance for guaranteed performance.
  • Formerless coil construction maximises magnetic efficiency causing faster switching speeds and an extended lifetime.
  • Insulation resistance greater than 1012 Ω

Claim your Free
Reed Relay now

The Series 122 10W rated reed relay is part of the successful 4mm2 TM product family that occupy a PCB footprint of only 4mm x 4mm, facilitating the highest packing density currently available. Series 122 relays measure 12.5mm in height and are rated with a switching current of 0.5A at 10W. 3V and 5V coils are available.

The device has pins on a 2mm square pitch. There are suitable connectors available from some manufacturers, both SMD and Through Hole, that will allow these relays to be stacked in either a row or in a matrix on a 4mm pitch.

If a higher rating is required, please consider our Series 120 which are rated up to 1.0 Amp at 20 Watts but with a higher profile height. If a lower profile height is required, please consider our Series 124 with a height of just 9.5mm whilst rated up to 5 Watts, 0.5 Amps switching.

 

TOP